1. Fill the “Member Application Form” and send to subscribe@mmix.net
2. After approval, you will be “Associate Member”, first.
3. Then, you will be “Principal Member” or “Institutional Member” after connecting to IXP and peering with at least one member.

To connect IXP, you need to prepare the following:

1. Fill the "Port Application Form" – signed by Technical Head and send to activation@mm-ix.net.
2. Transmission facility up Demarcation Points.

   Yangon POP:

   1. Cross connect Rack to Rack within TrueIDC.
   2. Fiber Termination at the ODF of Meetme room, Building 17, MICT.
   3. Fiber Termination at the outdoor Cabinet ODF beside MICT Gate3.

   Mandalay POP :

   1. Fiber Termination at the outdoor Cabinet of Oceanwave(OCW) Data Center.
3. Necessary Patch cords up to demarcation points.
4. Compatible transceiver for the interface of IXP switch.

Networking Requirement Details:

1. If you will setup direct peering with other members (bilateral), please contact directly and setup yourself.
2. If you like to accept all member’s prefix (Multilateral), you can setup BGP session with our Route Servers.
3. MMIX will check requested ASN(s) and IP Prefixes at the who is database, and shall not allow if those are not owned by the member or downstream(s) of the member.
4. Route Servers of MMIX will filter allowing only those ASN(s) and Prefix(es) and shall reject any others.
5. For additional ASN(s) and Prefix(es), please fill the “Prefix Request Form” and send to noc@mm-ix.net.

Technical Recommendation:

1. BGP router connecting to IXP should be dedicated one. International Gateway routers should not connect to IX.
2. That router should not have International routes and default gateway.
3. Your downstream links for IP Transit service should not directly connect to this router.
4. Your router should have only your local routes and IXP’s routes. Your downstream routes via IP Transit, should not be in this router.